|
|
| 商品编号: |
DVDXX17687 |
|
| 商品名稱： |
Siemens Simcenter FloEFD 2019.3.0 4745 x64 for Siemens NX 嵌入到Siemens NX中的計算流體力學（CFD）分析工具 |
|
| 碟片數量： |
1片 |
|
| 銷售價格： |
100 |
|
| 瀏覽次數： |
16237 |
|
【轉載TXT文檔】 |
|
| Siemens Simcenter FloEFD 2019.3.0 4745 x64 for Siemens NX 嵌入到Siemens NX中的計算流體力學（CFD）分析工具 |
FloEFD for Siemens NX是一個強大的計算流體力學（CFD）分析工具，嵌入到Siemens NX中。它使設計工程師能夠提前加載CFD，方法是在設計過程的早期將模擬移動到更具成本效益的位置，以便識別和修復問題，並通過x2到x40提高生產率。
浮雕是：
嵌入西門子NX–一個接口，一個型號
直觀易用
即使對於高度復雜的幾何體也具有快速且穩健的收斂準則
使用智能技術，精確
它也是唯一一款提供日語、中文、韓語、法語、德語和俄語本地用戶界面的CFD軟件。
使用FloEFD體驗優化的工作流、更快的結果和更高的生產率。
NX嵌入式CFD模擬
CAD嵌入式仿真使工程師能夠在與設計相同的用戶環境中進行分析。因此，工程師可以使用最新的CAD幾何圖形進行分析，以進行多個設計研究，並評估修改如何影響設計的性能，而無需進行數據轉換。
參數化研究和設計比較功能
FloEFD內部的比較配置和參數研究功能使工程師能夠了解幾何或邊界條件的變化對結果的影響。用戶可以通過數值、圖形、可視圖像和動畫來評估結果，從而比較各種項目排列，從而評估設計包線。
使用SmartCells™的快速自動嚙合技術
FloEFD使用網格技術，這被認為是模擬流體流動、傳熱和傳質的最有效框架。此外，借助SmartCells技術，即使是最復雜的CAD幾何圖形，網格劃分過程也可以輕松實現自動化。
FloEFD for Siemens NX is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40.
FloEFD is:
Embedded in Siemens NX – one interface, one model
Intuitive and easy-to-use
Fast and has robust convergence criteria even for highly complex geometry
Accurate due to use of intelligent technology
It is also the only CFD software delivering local user interfaces in Japanese, Chinese, Korean, French, German and Russian.
Experience streamlined workflows, faster results, and increased productivity with FloEFD.
NX-embedded CFD Simulation
CAD-embedded simulation enables engineers to conduct analysis in the same user environment as design. Therefore, engineers can use the latest CAD geometry for analysis to conduct multiple design studies and evaluate how the modifications influence the performance of the design without the hassle of data translation.
Parametric Study and Design Comparison Functionality
The compare configuration and parametric study capability inside FloEFD enables engineers to understand the influence of changes in the geometry or boundary conditions on the results. Users can evaluate the design envelope by assessing results by numerical values, by graphs and by visual images and animations and thereby compare a wide range of project permutations.
Fast and Automated Meshing Technology with SmartCells™
FloEFD uses meshing technology which is recognized as the most efficient framework for simulating fluid flows, heat and mass transfer. In addition, the meshing process can be automated easily for even the most complex CAD geometries with the aid of SmartCells technology.
SmartCells are unique technology that combine robust Cartesian meshing with highly efficient analytical or semi-empirical solver models; thus providing high levels of simulation accuracy with fewer number of mesh cells than in traditional CFD. SmartCells typically reduce the manual time spent by traditional CFD tool users in meshing even complex geometries by an order of magnitude on average thus dramatically reducing a historical bottleneck to CFD user productivity.
LED and Lighting Thermal Simulation Capabilities
FloEFD's LED Module offers a unique range of capabilities required for various lighting applications:
Its Monte Carlo radiation model is best suited for thermal radiation predictions in lighting applications where lenses or reflectors can cause hot spots in focal points from the light source (solar or man-made).
A new band-less Monte Carlo model for lighting and radiation allows users to dramatically decrease time required for defining wave-length dependent properties while increasing simulation accuracy of spectral characteristics.
Its new water film model enables simulation of surface condensation, evaporation, icing and de-icing exploration such as condensation on the inner surfaces of automobile headlights.
Combined thermal and photometric model for LEDs based on T3Ster measurements of actual off-the-shelf LEDs can yield correct power and temperature predictions and "hot lumen" output.
Definition of radiation spectrum and setting intensity of radiation can now be dependent on the angle. With that data defined, FloEFD now automatically applies the calculated radiant flux on top of the LED.
Easy ray visualization helps finding sources for radiation hot spots on other parts of the luminaire.
A water absorption model enables the simulation of absorption of water into the plastic housing of the luminaire and later release of it under the right environmental conditions.
Instinctive User Experience
FloEFD for NX features an easy-to-use GUI with considerable intelligent automation built-in as standard:
Operate within NX graphical user environment
Powerful analysis wizard guides users through the problem set-up
Interface uses engineering terms instead of technical jargon therefore users can focus on solving flow problems as opposed to figuring out how to use the software
Real-time feedback about the solution progress such as convergence and monitor point values
Engineering outputs appear in both a timely and intuitive manner including reports in Microsoft® Excel and Word
System requirements:
Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition,
Microsoft Windows 10 Pro or Enterprise 64-bit(tested with v1809)
For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64,
Windows Server 2016 with HPC Pack 2016
Microsoft Office 2013; Microsoft Office 2010; Microsoft Office 2007
Siemens NX 8.5.1.3, 8.5.2.3, 8.5.3.3
Siemens NX 9.0.1.3, 9.0.2.5, 9.0.3.4
Siemens NX 10.0.0.24, 10.0.2.6, 10.0.3.5
Siemens NX 11.0.0.33, 11.0.1.11, 11.0.2.7
Siemens NX 12.0.0.27, 12.0.2.9
Siemens NX 1847 Series
Siemens NX 1872 Series
|
|
|
專業軟體光碟